Archive | February 2016

Upgrade Code on a HPE Provision Switch

I’m currently having to dig into the HPE Provision line of switches. ¬†Here are a few notes to document the process of upgrading the code on a HPE 2920.

 

Step 1 – Validate current code version using show version command:

initial_sh_version

Step 2 – Copy new code to flash using copy tftp flash command:

copy_command.png

Once the file transfer is complete the system will validate the new code:

validate

Step 3 РVerify the system is configured to boot of the partition with the new code installed using the show flash command:

final_sh_version

Step 4 – Reboot the switch using the reboot command (make sure to save changes if needed)

Advertisements